Thanks to effective insulation by the advanced weatherproof enclosure, these models are characterized by a very low noise level. GEA BluAir models offer customers a greater flexibility for the installation site and for operation. The chillers – completely factory-assembled with air-cooled condensers – allow for simple installation and are especially suitable at sites without cooling water management.
Low Refrigerant Charge
Using plate and frame heat exchangers allows for a low refrigerant charge within the chiller. In addition, rather than pumping large amounts of ammonia, various heat transfer fluids are used to keep ammonia in the engine room and away from processing and storage areas.
Reduced Installation Costs
Galaxy Series chiller uses less ammonia field piping. This simplified piping requirement and time-saving electrical connections keep installation costs significantly lower.
Specifications
Galaxy Model number | Compressor Model number | Nomianal Capacity 20ºF Leaving Glycol (TR) | Motor Size 20ºF Glycol (HP) | Nominal Capacity 42ºF Leaving Water (TR) | Motor Size 42ºF Water (HP) |
G110 | 110GMX | 100 | 150 | 165 | 200 |
G125 | 125GMX | 120 | 200 | 190 | 200 |
G160 | 160GMX | 155 | 250 | 245 | 250 |
G195 | 195GMX | 190 | 300 | 305 | 300 |
G230 | 230GLX | 235 | 350 | 380 | 350 |
G290 | 290GLX | 295 | 400 | 470 | 450 |
G340 | 340GLX | 335 | 450 | 525 | 500 |
G400 | 400GLX | 405 | 600 | 640 | 600 |
G475 | 475GLX | 460 | 600 | 730 | 700 |
G565 | 565GLX | 550 | 700 | 875 | 800 |
G675 | 675GLX | 635 | 800 | 1,010 | 900 |
G800 | 800GLX | 750 | 1,000 | 1,190 | 1,000 |
Note: Capacities are based on cooling water available at 85ºF